AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Forklift fork capacity chart11/14/2023 ![]() ![]() This provides adequate safety margins for dynamic (moving) loads to protect against permanent deflection and/or catastrophic failure. ![]() This means that on a static (non-moving) load-lifting forks must be able to hold 3 times their rated capacity. Safety Factor – ANSI B56 and ITSDF standards dictate that all lifting forks have a 3:1 safety ratio. Heel – The bottom of a fork that contacts the ground at the 90° bend of the fork. capacity or in telehandler style extended boom forklifts. Most frequently found in forklifts over 15,000 lb. This fork has a bushing, or eye welded to the shank and is typically mounted on a round shaft or bar. Most frequently found in ITA style forklifts.Įye – Also referred to as pin type, shaft mount or bushing type forks. Most commonly referred to in construction equipment like wheel loaders, backhoes, and skid steers.Ĭapacity – this is the maximum lifting capacity of a machine or a set of pallet forks.Ĭlips – Mounting brackets that are commonly welded to the back of a fork in rail-type mounting applications. ![]() Measured from the inside face of the shank to the tip of the blade.īreakout Force – Force in pounds that a machine has to “pry” material. Pallet Fork Terms:īlade – The horizontal, lifting portion of a forklift fork. Outside of selecting a pallet fork that properly fits your application, the most critical area in determining what fork is right for your machine is its fork capacity and lifting. ![]()
0 Comments
Read More
Leave a Reply. |